A Guide on How To Fix Chipped Paint on Your Walls

A Guide on How To Fix Chipped Paint on Your Walls

It's no secret that wall paint can chip, crack, or fall off entirely. So, what do you do if accidents happen? You don't want your neighbors, friends, and family to see such an eyesore, so the best thing you can do is take care of the problem quickly. Luckily, the process is both swift and simple. Read this guide on how to fix chipped paint on your walls and fix the damage to your wall paint.

Prepare the Area and Remove Any Paint

This part depends on how extensive the damage is on the wall. If there's widespread paint damage, you might have to bite the bullet and just repaint the entire wall. This is even more important for a wall that has been damaged underneath because there are special protocols in place to fix it. However, if it's just a little peeling, just repaint the old chips. Take the scraper or repair tool and begin scraping off the large chunks first. After that, begin to gently scrape off the smaller bits with a wire brush to strip the area completely. You'll want to wear safety glasses and a dust mask so you don't inadvertently inhale any harmful paint particles.

Sand It Down and Fill the Damaged Paint

Sanding is important since it'll blend your wall paint and make it look pristine. If you sand your walls before you repaint, it'll make your wall paint blend. After this, you can use different tools to fill in the chipped portions of the wall paint. You'll likely need some spackling paste to fill any small areas or joint compound. Wooden filler is useful for wooden wall cracks. You'll want to gradually apply these fillers in thin layers, letting them dry according to manufacturer requirements. A quick hack would be to use a mini hairdryer to speed up the drying process to get the job done. After the filler dries, you'll want to sand the wall paint again to blend the filler into the wall.

Clean Off Sanded Dust, Prime, and Paint

Start this process by vacuuming dust from the sanding and then applying primer. This will keep the paint adhered to the wall. Make sure the primer completely dries before you move on to repainting the wall, or it might peel again, and you'll have to start over. After the primer dries, you're set to repaint the wall in the same color as the original paint.

In short, if you follow this guide on how to fix chipped paint on your walls, you'll be well on your way to making your house more aesthetically pleasing to anyone that drops in. This is a relatively simple process and one that you'll be grateful you went through for years to come.

Post a Comment