4 Ways To Fix Low Water Pressure in Your Shower

4 Ways To Fix Low Water Pressure in Your Shower

There’s nothing more disappointing than turning on your shower and seeing a weak trickle of water. It diminishes the quality of your showers. Fortunately, fixing this issue is often simpler than you might think. Here are a few ways to fix low water pressure in your shower.

1. Cleaning the Showerhead

If you experience low water pressure, mineral deposits from hard water buildup may be reducing water flow. Clean your showerhead by unscrewing it from the pipe. If it’s been on there for a while, you may need a pair of pliers to loosen it.

Once it’s off, soak the showerhead in white vinegar and water for a few hours. Afterward, use a small brush or a paper clip to remove any remaining debris. Finally, give it a thorough rinse and screw it back on. You’ll likely notice a significant improvement in your water pressure.

2. Checking for Water-Flow Restrictions

Sometimes the problem of low water pressure lies in the water pipes. Check to see if a shutoff valve on the water supply line leading to the shower isn’t fully open. Even a partially closed valve restricts water flow.

If this isn’t the issue, consider whether any recent plumbing work might have led to a kink in the pipe, which would similarly reduce the flow. Examine the pipeline by carefully checking visible sections for any signs of constriction. If you find one, you must correct it by straightening the pipe or calling a professional to address any hidden issues.

3. Inspecting for Pipe Leaks

Leaking pipes may decrease the water pressure in your shower. Even a small leak significantly diminishes the amount of water reaching your showerhead. Be sure to check the hot- and cold-water pipes for any moisture on the outside.

Additionally, check the pipe ends for any leaks. If the plugs of these openings are damaged or missing, follow best practices for securing plastic end pipe plugs. These include choosing the right adhesion and material for its purpose.

Mold or mildew growth in the area indicates a slow leak. If your pipes are solid, check the faucet drip on the shower head. That might suggest a problem that’ll require a thorough inspection and repair.

4. Adjusting the Pressure Regulator

Some homes have a water pressure regulator where the main water line enters the house. This device maintains consistent pressure throughout your home. However, it may need adjustment over time.

If you suspect the regulator is the issue, check the water pressure in your home using a pressure gauge. Then, refer to your manufacturer’s instructions for adjusting the pressure regulator. Most often, a simple bolt turn will increase the flow and fix the low water pressure in the shower. But if you’re unsure how to do this or the regulator appears faulty, call a professional to make the necessary adjustments or replacements.

Post a Comment